A SERVICE OF

logo

Open as PDF
next previous
Chapter 25 Configuration: Spanning Tree
GS1900 Series User’s Guide
152
Figure 134 Configuration > Spanning Tree > MST Port > Edit
The following table describes the labels in this screen.
Table 116 Configuration > Spanning Tree > MST Port > Edit
LABEL DESCRIPTION
STP MST Port
MST ID Displays the MST ID number.
Port List Enter the index number of the MTP port(s).
Priority Configure the priority for each port here.
Priority decides which port should be disabled when more than one port forms a loop in a
switch. Ports with a higher priority numeric value are disabled first. The allowed range is
between 0 and 255 and the default value is 128.
Internal Path
Cost (0=Auto)
Enter the internal path cost. Enter 0 for Auto.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.