Chapter 30 Configuration: Management
GS1900 Series User’s Guide
206
The following table describes the labels in this screen.
30.7.2 The Profile Add/Modify Screen
Use this screen to configure the Profile settings. Click Configuration > Management > Remote
Access Control > Profile > Add/Modify to open this screen.
Table 172 Configuration > Management > Remote Access Control
LABEL DESCRIPTION
Global
State Select the global remote access setting to be enabled or disabled.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Profile
Add Click Add to create a new profile entry.
No. Displays the priority level of the entry. The value can be between 1 and 16.
Action Displays the action value. The values are Permit or Deny.
Source IP Display the source IP value.
Wildcard Mask Displays the source IP wildcard.
Port Display the port value.
Service Display the service used for remote access. The values are ALL, HTTP, HTTPS, or SNMP.
Modify
Edit Click Edit to make changes to the entry.
Delete Click Delete to remove the entry.
