Chapter 30 Configuration: Management
GS1900 Series User’s Guide
201
30.4 Error Disable
30.4.1 The Error Disabled Screen
Use this screen to configure the Error Disabled settings. Click Configuration > Management >
Error Disable to open this screen.
Figure 185 Configuration > Management > Error Disable
The following table describes the labels in this screen.
Community
Name
Displays the community name that this entry belongs to.
User Name Displays the user name that this entry belongs to.
UDP Port Enter a UDP port for this entry.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 166 Configuration > Management > SNMP > Trap Destination > Add/Modify (continued)
LABEL DESCRIPTION
Table 167 Configuration > Management > Error Disable
LABEL DESCRIPTION
Error Disabled Settings
Recovery
Interval
Enter the recovery interval value.
Broadcast Flood Select an option to Enable or Disable the Broadcast Flood.
Unknown
Multicast Flood
Select an option to Enable or Disable the Unknown Multicast Flood.
Unicast Flood Select an option to Enable or Disable the Unicast Flood.
Port Security Select an option to Enable or Disable the Port Security.
