Chapter 5 Getting Start
GS1900 Series User’s Guide
38
Each field is described in the following table.
After clicking Next, the set up your username/password screen appears.
Figure 21 Getting Start > Start up > 2 Step 2 Set up username/password
Each field is described in the following table.
After clicking Next, the finish screen appears.
Table 10 Getting Start > Start up > 1 Step 1 Set up IP/DNS
LABEL DESCRIPTION
Host Name This field displays a host name.
IP Address The Switch needs an IP address for it to be managed over the network. The factory
default IP address is 192.168.1.1.
Subnet Mask The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
Gateway Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
DNS DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
NTP(Network Time
Protocol)
This field displays the NTP time servers from which the Switch gets the time and date.
Next Click Next to show the next screen.
Table 11 Getting Start > Start up > 2 Step 2 Set up username/password
LABEL DESCRIPTION
Username The default username is admin and associated default password is 1234.
Password The default username is admin and associated default password is 1234.
Previous Click Previous to show the previous screen.
Next Click Next to show the next screen.
