Chapter 30 Configuration: Management
GS1900 Series User’s Guide
194
Figure 175 Configuration > Management > SNMP
The following table describes the labels in this screen.
30.3.2 The Community Screen
Use this screen to view the Community settings. Click Configuration > Management > SNMP >
Community to open this screen.
Figure 176 Configuration > Management > SNMP > Community
The following table describes the labels in this screen.
Table 157 Configuration > Management > SNMP
LABEL DESCRIPTION
Global
State Select the global SNMP setting to be enabled or disabled.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 158 Configuration > Management > SNMP > Community
LABEL DESCRIPTION
SNMP community
Add Click Add to create a new SNMP Community entry.
Community
Name
Displays a string identifying the community name that this entry should belong to. The
allowed string length is 1 to 20, and the allowed content is ASCII characters from 33 to
126.
Access Right Displays the access mode for this entry. The possible values are Read-Only and Read-
Write.
Modify
Edit Click Edit to make changes to the entry.
Delete Click Delete to remove the entry.
