Chapter 30 Configuration: Management
GS1900 Series User’s Guide
202
30.5 HTTP/HTTPS
30.5.1 The HTTP Screen
Use this screen to configure the HTTP settings. Click Configuration > Management > HTTP/
HTTPS to open this screen.
Figure 186 Configuration > Management > HTTP/HTTPS
The following table describes the labels in this screen.
POE Inline
Power
Select an option to Enable or Disable the POE Inline Power.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 167 Configuration > Management > Error Disable
LABEL DESCRIPTION
Table 168 Configuration > Management > HTTP/HTTPS
LABEL DESCRIPTION
HTTP
State Select the HTTP mode operation.
Possible modes are:
• Enabled: Enable HTTP mode operation.
• Disabled: Disable HTTP mode operation.
Authentication
Method
Select the authentication method from the dropdown list.
Session Timeout Enter the session timeout value. The timeout can be between 0 and 86400 minutes.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
