Filter
Top Products
3MTMDetection Mangement Software (DMS)
Loading
053-644, Rev E Page 11 eg4 & eg3
11
3M
TM
Detection Management Software (DMS) is a software application designed by 3M
Quest that runs under the Windows operating system. You can use DMS for a variety of
functions related to the Edge dosimeter and with many other 3M Quest instruments. DMS
has the ability to customize your set-up parameters, display data, manipulate data, and
create reports.
To load DMS, follow the screen prompts.
It will automatically load the drivers for the EdgeDock1 and/or EdgeDock5. If loading from
the 3M detection Internet site, please follow the directions online located:
www.3m.com/detection or www.quest-technologies.com.
Depending on the kit you purchased, you may have an EdgeDock1 and/or an EdgeDock5.
Both are designed similarly with the same LED indicators. The main difference with the
EdgeDock5 is that it has five bays for docking, charging, and/or managing the dosimeters.
If desired, the EdgeDock5 will charge all docked instruments at one time.
The docking station serves a dual-purpose role:
1. It is used to charge the battery on the dosimeter(s).
2. It is used to communicate between the software (DMS) and the dosimeter (i.e.,
import, export settings and measurement files).
Figure 2-4: EdgeDock1
Charging Indicator
Power Indicator
Charge contacts
Power connector
USB connector