Filter
Top Products
Overview of running a study
Resetting the dosimeter
053-644, Rev E Page 35 eg4 & eg3
35
The Edge can be reset through the dosimeter keypad or via QSP-II. The steps below outline how
to reset your dosimeter.
Reset
1. Ensure the meter is Off.
2. Turn the meter on by pressing the on/off enter button.
3. When the splash screen appears, press and hold the run/stop and on/off enter
buttons until the splash disappears.
Figure 4-5: Splash screen
4. The Setup menu appears on the Edge. Press the up or down arrow to select the reset icon
(symbol).
NOTE: Setup menu is used to reset the dosimeter, change the contrast, and return to the
main view.
Figure 4-6: Resetting the Edge from the keypad
5. Press and hold the on/off enter button.
A 3, 2, 1 countdown will appear, and then a shaded bar will appear indicating the dosimeter is
being reset.
6. Press the down arrow until the checkmark icon is selected (denoted by the arrows). Then,
press the on/off enter button to return to the measurement view screen.
Edge Splash screen
Arrows and enter key
Indicates the valid keys
are selected
Checkmark icon
Is the selection to
exit the setup menu
Reset icon