Filter
Top Products
enclosureIDN,drawerIDN,slotIDN) [enclosureLossProtect=(TRUE | FALSE)]
[dataAssurance=(none | enabled)]
User-Defined Disk Group
recreate storageArray replicationRepository
repositoryDiskGroup=diskGroupName
[freeCapacityArea=freeCapacityIndexNumber]
User-Defined Number of Drives
recreate storageArray replicationRepository
repositoryRAIDLevel=(1 | 5 | 6)
repositoryPhysicalDiskCount=numberOfPhysicalDisks [physicalDiskType=(SAS)]
[enclosureLossProtect=(TRUE | FALSE)]
[dataAssurance=(none | enabled)]
Parameters
Parameter Description
repositoryRAIDLevel
The RAID level for the replication repository virtual
disk. Valid values are 1, 5, or 6.
repositoryPhysicalDisks
The physical disks for the replication repository
virtual disk. Specify the enclosure ID and slot ID for
each physical disk that you assign to the replication
repository virtual disk. Enclosure ID values are 0 to
99. Slot ID values are 1 to 32. Enclose the
enclosure ID values and the slot ID values in
parentheses.
repositoryDiskGroup
The name of the disk group where the replication
repository virtual disk is located.
freeCapacityArea
The index number of the free space in an existing
disk group that you want to use to re-create the
replication repository virtual disk. Free capacity is
defined as the free capacity between existing
virtual disks in a disk group. For example, a disk
group might have the following areas: virtual disk 1,
free capacity, virtual disk 2, free capacity, virtual
disk 3, free capacity. To use the free capacity
following virtual disk 2, you would specify:
freeCapacityArea=2
Run the show diskGroup command to determine
if a free capacity area exists.
repositoryPhysicalDiskCount
The number of unassigned physical disks that you
want to use for the replication repository virtual
disk.
enclosureLossProtect
The setting to enforce enclosure loss protection
when you create the replication repository virtual
240