Filter
Top Products
Show Thin Virtual Disk
Description
This command returns the expansion history or the consumed capacity for the specified thin virtual disk
or virtual disks.
Syntax
show (allVirtualDisks | virtualDisk [virtualDiskName] |
virtualDisks [virtualDiskName1 ... virtualDiskNameN])
(consumedCapacity | (expansionHistory [file=fileName]))
Parameters
Parameter Description
allVirtualDisks
The setting to return information about all of the
virtual disks in the storage array.
virtualDisk or virtualDisks The name of the specific virtual disk for which you
are retrieving information. You can enter more
than one virtual disk name. Enclose the virtual disk
name in square brackets ([ ]). If the virtual disk
name has special characters, you also must
enclose the virtual disk name in double quotation
marks (" ").
consumedCapacity
The setting to return a concise list of information
about the consumed capacity of the thin virtual
disks.
expansionHistory
The setting to return a concise list of information
about the expansion history of the thin virtual disks.
file
The file parameter specifies a file to log the
output of the expansionHistory parameter. The
file is valid only when used with the
expansionHistory parameter. An invalid file
name causes the command to fail.
Notes
With the expansionHistory parameter, the command returns information similar to the example
shown below.
Thin virtual disk name: virtual disk-nameRepository virtual disk Name:
REPOS_NNNN
Logged Time Expansion Type Start Capacity End Capacity
372