Filter
Top Products
Parameters
Parameter Description
physicalDiskChannel
Identifier number of the physical disk channel for
which to set the status. Valid physical disk channel
values are 1 or 2. You must put brackets ([ ])
around the physical disk channel number.
status
Condition of the channel. You can set the channel
status to optimal or degraded.
NOTE: Use the optimal parameter to move a
degraded channel back to the Optimal state.
Use the
degraded parameter if the channel is
experiencing problems, and the storage array
requires additional time for data transfers.
Set Physical Disk Hot Spare
Description
This command assigns or unassigns one or more physical disks as a hot spare.
Syntax
set (physicalDisk [enclosureID,slotID] |
physicalDisks [enclosureID1,slotID1 enclosureID2, slotID2...
enclosureIDn,slotIDn
])
hotSpare=(TRUE | FALSE)
Parameters
Parameter Description
physicalDisk or physicalDisks
The enclosure and the slot where the physical disk
resides. Enclosure ID values are 0 to 99. Slot ID
values are 0 to 31. Enclose the enclosure ID values
and the slot ID values in square brackets ([ ]).
hotSpare
The setting to assign the physical disk as the hot
spare. To assign the physical disk as the hot spare,
set this parameter to TRUE. To remove a hot spare
assignment from a physical disk, set this parameter
to FALSE.
298