Filter
Top Products
Syntax
start physicalDiskChannel [(1 | 2)] blink
Parameters
Parameter Description
physicalDiskChannel
The identifier number of the physical disk channel
that you want to locate. Valid values for the
identifier number are 1 or 2. Enclose the identifier
number in square brackets ([ ]).
Start Physical Disk Initialize
Description
This command starts physical disk initialization.
CAUTION: As soon as you enter this command, all user data is erased.
Syntax
start physicalDisk [enclosureID,slotID] initialize
Parameters
Parameter Description
physicalDisk
Identifies the enclosure and slot where the physical
disk resides. Enclosure ID values are 0 to 99. Slot
ID values are 0 to 31. You must put brackets ([ ])
around the enclosure ID value and slot ID value.
Start Physical Disk Reconstruction
Description
This command starts reconstructing a physical disk.
Syntax
start physicalDisk [enclosureID,slotID] reconstruct
Parameters
Parameter Description
physicalDisk
Identifies the enclosure and slot where the physical
disk resides. Enclosure ID values are 0 to 99. Slot
385