Filter
Top Products
Note that in a multi-MFD network, each MFD’s NMEA2000 backbone is separate and
independent. Therefore, you may have to perform the same procedure on each MFD
where external NMEA2000 displays (i.e. FI-50, etc...) or sensors are connected.
Note: This setting only configures the NMEA2000 Output Data. The NMEA2000 data
received (Input) at each MFD and DRS is global and automatically recognized by the
network. Each NMEA2000 Data Source at each MFD will automatically appear and
may be selected as a Primary System Data Source.
Click on the “Port Monitor” button if you want to make sure that the NMEA2000 devices
are correctly seen by the MFD
The list of every NMEA2000 devices connected to the MFD will appear at the top of the
window. Simply select one device (by clicking on the line) and choose a tab (Receive
PGN List or Transmitted PGNs) to have more information on a specific device.
50