Filter
Top Products
6.1.1. Basic Plotter/Fish Finder Installation
The Furuno GPS (FUSA P/N BBWGPS) is directly connected to 7-Pin Port DATA1 of
the MFD. The DFF1 Fish Finder (FUSA P/N DFF1) is directly connected to the Ethernet
port of the MFD using the standard supply cable (3Meter). If the Ethernet connection
needs to be extended, use a longer cable or add a LAN Coupler (FUSA P/N= RJ4-5CN-
STR) with the following longer Ethernet Cables:
- 2 Meter RJ45 to RJ45 Ethernet Cable (P/N 000-167-175)
- 5 Meter RJ45 to RJ45 Ethernet Cable (P/N 000-167-176)
- 10 Meter RJ45 to RJ45 Ethernet Cable (P/N 000-167-177)
6.1.2. Basic Plotter/Radar/Fish Finder Installation
This is a single station Plotter/Radar/Fish Finder installation.
The Furuno GPS (FUSA P/N BBWGPS) is directly connected to 7-Pin Port DATA1 of
the MFD. Since two Ethernet sensors are on the network (DRS Radar and Fish Finder),
a network switch (FUSA P/N HUB101) is necessary. In this case the Radar power cable
is directly connected to the back of the MFD8/12 (DRSxD (Domes) can be powered
71