Filter
Top Products
3. PLOTTER OPERATION
3-29
Entering a waypoint from the waypoint list
You can manually enter waypoint position from the waypoint list as follows:
1. Press the MENU key to open the menu.
2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.
3. Press the LOCAL LIST (lists waypoints in order from nearest to furthest, maximum 32
points) or ALPHANUMERIC LIST (lists waypoints in ALPHANUMERIC order) soft key.
Alphanumeric waypoint list
Local waypoint list
GOTO
NEW
WPT
EDIT
WPT
ERASE
WPT
RETURN
WPT
ALPHA
PUSH ENTER KNOB TO
SEARCH FOR
---
▲
ABALONE
35°47.010'N
135°21.000'W
00:00 01JAN01
BRG 350.9
°
RNG 3.80nm
CRAB
34°42.000'N
135°21.050'W
00:00 01JAN01
BRG
050.9°
RNG
1.98nm
FISH
34°41.000'N
135°21.030'W
00:00 01JAN01
BRG
065.9°
RNG
1.83nm
LOBSTER
38°44.300'N
135°21.010'W
00:00 01JAN01
BRG
144.9°
RNG
4.93nm
GOTO
NEW
WPT
EDIT
WPT
ERASE
WPT
RETURN
WPT
LOCAL
▲
ABALONE
35°47.010'N
135°21.000'W
00:00 01JAN01
BRG 350.9
°
RNG 3.80nm
CRAB
34°42.000'N
135°21.050'W
00:00 01JAN01
BRG
050.9°
RNG
1.98nm
FISH
34°41.000'N
135°21.030'W
00:00 01JAN01
BRG
065.9°
RNG
1.83nm
LOBSTER
38°44.300'N
135°21.010'W
00:00 01JAN01
BRG
144.9°
RNG
4.93nm
234/250
234/250
Alphanumeric and local waypoint lists
4. Press the NEW WPT soft key to show the waypoint window (see the figure on the
previous page). Own ship position is shown in the position box.
5. Select the position box and enter position desired.
6. If desired, change waypoint data following the instructions from step 6 in “Editing a
waypoint from the plotter display” on page 3-30.
7. Press the SAVE soft key to register the waypoint.
8. Press the MENU key to close the menu.
3.8.2 Editing waypoint data
Waypoint data may be edited from the waypoint list or directly from the plotter display.
Editing waypoint data from the waypoint list
1. Press the MENU key to open the menu.
2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.
3. Press the LOCAL LIST or ALPHANUMERIC LIST soft key as appropriate.
4. Use the Trackball to select the waypoint you want to edit.
5. Press the EDIT WPT soft key.
6. Edit data as appropriate.
7. Press the SAVE soft key.
8. Press the MENU key to close the menu.