Filter
Top Products
5. AIS Operation
5-3
5.2 How to Deactivate the AIS Function
Use the trackball to set the cursor on the AIS status indication in the information area. Long-push the left button to
display FUNC OFF. To activate AIS, push the left button again.
SINGLE
AUTO
MAN
xx.xx xx.xx
Note: You cannot enable AIS if any of the items listed below are active.
Manual speed
Manual set & drift
Speed from reference targets
The message shown right appears if you try to activate the AIS function when the above-mentioned items are active.
5.3 How to Turn the AIS Display On/Off
Targets that are being tracked by an AIS transponder can also be displayed on the display. Put the cursor on the AIS
status indication in the information area then push the left mouse button to select an option :DISP OFF, DISP FIL,
or DISP ALL. DISP FIL filters AIS targets according to the settings on the AIS filter dialog box (see the procedure
below.)
SINGLE
AUTO
MAN
xx.xx xx.xx