Filter
Top Products
18-1
18. Anchor Watch
18.1 Introduction
Anchor watch checks to see if your ship is drifting when it should be at rest. Set the limit for anchor watch on the
menu. If your vessel drifts more than the distance set, the alert "874: Anchor watch" appears.
Position where anchor
watch was started.
Alarm
setting
Alarm triggered when
ship travels a distance
greater than the alarm
setting.
18.2 How to Activate Anchor Watch
To activate the anchor watch, do the procedure shown below.
1. Open the main menu.
2. Select Anchor Watch.
3. Enter desired value in the Drag circle field.
4. Drop the anchor then click the Drop Anchor button. The Start Anchor Watch
button appears (below the Clear Anchor button).
5. To start the anchor watch, click the Start Anchor Watch button.
If your vessel travels more than the distance set here, the alert "874: Anchor watch"
appears. To continue to use the anchor watch, click the Clear Anchor button to start
the alarm from your current position.