Filter
Top Products
16. Recording Functions
16-8
16.4.2 How to set conditions for viewing and logging of danger targets
The operator may set Closest Point of Arrival (CPA), Time for CPA (TCPA) and Log interval for viewing
dangerous TT and AIS targets on the chart radar display. User can also alternatively log only information of a single
chosen TT or AIS target.
Alert Log
Alert Queue
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the mouse functions
area then push the left mouse button.
2. Choose Record from the menu and Settings from the submenu.
3. If the Danger Targets page is not already open, click the Danger Targets tab
to open it.
TT
T VECT(G) 12 min
Predictor OFF
PAST POSN T 10min
CPA 10.0NM 30 min
CPA Auto act. OFF
Lost TGT alarm FILT
SINGLE xx.xx
AUTO
MAN
AIS
DISP
ALL
<
16.4.3 How to save past track of a chosen TT or AIS target
To save past track of chosen TT or AIS target, do the following:
1. Find number of TT or name of AIS target, by placing the cursor on the target then pushing the scrollwheel.
2. Choose Settings from the Record menu then open the Danger Targets page.
3. In the Log Single Target window, choose TT number and/or AIS target name from the TT and AIS boxes.
4. You can make a user chart from the danger target log. For further details see section 16.9 Making a User Chart
from a Log (past track).
Note: By choosing a single target only the chosen target's information is recorded. If you want to record information
of all danger targets, remove selection from the boxes in the Log Single Target window.