Filter
Top Products
13. Notes
13-3
13.2 How to Use Notes
To prepare Notes, do the following:
1. Put the cursor on Notes in the sidebar, then click the Plan or Monitor button as appropriate. If no Notes is
chosen, the Notes menu (shown below) appears in addition to the Monitor Notes dialog box or Plan Notes
dialog box.
2. If no menu appears, click the same button once more to open the menu.
Activate Monitor/Plan mode: User can switch Notes mode between plan and
monitor. Using
Go Monitor mode> Go Monitor mode, Notes used in the plan mode can be
switched directly to the monitor mode.
Go Plan mode> Go Plan mode, Notes used in the monitor mode can be switched
directly to the plan mode.
Select: Chooses Notes to use; monitor or plan mode.
Unselect: Unselect removes Notes from active use.
Create: Creates new Notes. Notes can be named, using up to 30 alphanumeric
characters.
Backup and Restore: User can make backup copy from Notes or restore from
backup media.
Report: Generates tabulated report from chosen Notes.
Note: If you want Notes to be displayed on the electronic chart, make sure that Notes options are turned on in the
Mariner page of the Chart Display dialog box.
i
THIS IS A TEST
THIS IS A TEST
1. 2. 3. 4.
Position
marker
Position marker
and text
Position marker
and range marker
Position marker,
text, and range marker
Four different variations as examples of how Notes is presented on the chart area:
1. Position marker
2. Position marker and text
3. Position marker and range marker
4. Position marker, text and range marker