Filter
Top Products
7. Vector Charts
7-69
7.12 Symbology Used in Vector Charts
You can familiarize yourself with the symbology used by browsing IHO ECDIS Chart 1, which is included in this
chart radar. Note that it behaves as any S57 chart and it follows your selections. See section 7.9.3 How to control
visible chart features.
You can familiarize yourself with the symbology used by browsing IHO ECDIS Chart 1, which is included in this
ECDIS. Note that it behaves as any S57 chart and it follows your selections. See section 7.9.3 How to control visible
chart features.
1. Open the Chart menu.
2. Choose ECDIS Chart 1 from the menu then push the scrollwheel.
3. Choose desired chart symbols from the submenu to show on the ECDIS.
Appendix 2 contains examples of plots with symbols.
The Return dialog window appears when you choose something from the submenu of ECDIS Chart 1. When you
close the Return dialog window, by clicking the X at the upper right corner, ECDIS Chart 1 will be closed and
normal chart presentation is displayed.
An example of Overview chart
7.12.1 How to change presentation library used for vector chart features
The chart radar uses the official IHO presentation library to draw vector charts. The presentation library is
replaceable, but this feature is only intended to be used by qualified service personnel and type approval authorities.
When this manual was published the official presentation library was "pslb03_2.dai", known as "Official IHO
presentation library for chart radar Ed 3 revision 1, Edition: 3.2".