Garmin TR-1 Marine Instruments User Manual


 
26
27
Corded Mount:
Different options are available. TR-1 has
an optional clip than can be purchased
separately, Fig. 29.
Fig. 29
Flush Mount:
Remove the back cover of handheld. Using the
back of the handheld as a guide drill 2 1/4” holes
into your dash. Drill a 3rd 5/8” hole in the center
of those holes for the cord and pico connector to
go through. Mount the handheld using the existing
nuts you removed from the back. If your dash is
too thick, you will need to use thread extenders.
See Fig. 30 & Fig. 31. Those can be purchased
separately.
Extender Kit
Thread Extender kit comes in (2)
lengths. 1/2” or 1”.
Part Numbers:
1/2”: 120-2045-02
1” :120-2045-04
The handheld connects to # 3 at the ECU. The handheld comes with a standard 18’ cable. It can be extended in length by
using extensions. These are available in three lengths; 10 ft, 20 or 30 ft.
Fig. 30
Fig. 31
Flush Mount
Corded Mount
Installation Of Handheld
Mic Clip Part Numbers:
White 120-2043-03
Black 120-2043-02