Filter
Top Products
page | 12
Advanced Operation
Advanced Operation
Commands
Command Description
#show_serial_params
Displays the settings of the specied RS-232 port
#show_telnet_pass
Displays the current TCP terminal password
#show_ver_data
Displays the rmware and hardware version of the IP to
RS-232 Converter
#system_wide_reset
Restarts the IP to 2 x RS-232 Converter according to
the supplied parameter
#use_discovery
Enables or disables discovery mode
#use_tcp_access
Enables or disables TCP access mode
#use_tcp_term_pass
Enables or disables the password prompt at the
beginning of a Telnet session
#use_udp_access
Enables or disables UDP access
#use_udp_echo
Enables or disables UDP echo