Gefen EXT-IP-2-RS2322 Marine Battery User Manual


  Open as PDF
of 84
 
page | 20
Commands
#set_ipadd
Species the IP address of the IP to 2 x RS-232 Converter. The IP address must be
specied using dot-decimal notation. The unit must be rebooted after executing this
command. The default IP address is 192.168.1.72.
Syntax
#set_ipadd param1
Parameters
param1 IP address
Example
#set_ipadd 10.5.64.187
New IP set to: 10.5.64.187
Related Commands
#set_gateway
#set_http_port
#set_end_del
#show_ipcong
Advanced Operation
Advanced Operation
 previous next