Filter
Top Products
page | 32
Commands
Advanced Operation
Advanced Operation
#set_udp_br_port
Sets the UDP bridge listening port. The default UDP bridge port settings for RS-232 1
and RS-232 2 ports are 50200 and 50201, respectively.
Syntax
#set_udp_br_port param1 param2
Parameters
param1 Serial port [1 ... 2]
param2 Port [1 ... 65535]
Example
#set_udp_br_port 1 50200
UDP Bridge 1, port set to: 50200
Related Commands
#set_tcp_br_port
#set_tcp_term_port
#set_start_del
#set_udp_remote_br
#set_udp_rip
#set_udp_rport