Filter
Top Products
page | 17
Commands
Advanced Operation
#set_end_del
Sets the end-delimiter mode and value for the specied serial port. The End Delimiter value
must be specied in hexadecimal. Before executing this command, the Start Delimiter must
be set, using the #set_start_del command.
Syntax
#set_end_del param1 param2 param3
Parameters
param1 Serial port [1 ... 2]
param2 State [0 ... 1]
Value Description
0
Off
1
On
param3 End delimiter [00 ... FF]
Example
#set_end_del 1 1 ba
End delimiter set to ON with a value of ba
Related Commands
#set_add_delim
#set_start_del