Filter
Top Products
page | 35
Commands
Advanced Operation
#set_udp_remote_br
Assigns the UDP Bridge settings for the specied serial port. param2 must be entered in
dot-decimal notation.
Syntax
#set_udp_remote_br param1 param2 param3
Parameters
param1 Serial port [1 ... 2]
param2 Address
param3 Remote port [1 ... 65535]
Example
#set_udp_remote_br 1 192.168.1.70 51000
Remote UDP bridge 1 set to: IP=192.168.1.70 Port=51000
Related Commands
#set_udp_port
#set_udp_br_port
#set_udp_echo_br
#set_udp_rip
#set_udp_rport