Filter
Top Products
page | 13
Advanced Operation
Commands
#help
Displays help on a specic command. If no command is specied (param1), then a list
of all available commands will be displayed. Set param1 to “full” to display a list of all
commands.
Syntax
#help
Parameters
param1 Command (optional)
Example
#help #set_add_delim
Cmd #set_add_delim: Set Add delimiter mode
Syntax: #set_add_delim [param1][pram2]
Param1: Serial Port(1,2)
Param2: 1 - On , 0 - Off
e.g: #set_add_delim 1 0
#help full
...
Cmd #show_serial_params: Show Serial Port Parameters
Syntax: #show_serial_params
Param: Serial Port(1,2)
e.g: #show_serial_params 1
Cmd #set_serial_mode: Set Serial Port mode
Syntax: #set_uart_mode [param1][param2]
Param1: Serial Port(1,2)
Param2: 1 (Terminal) for Port1 only,2 (TCP Bridge),3 (UDP Bridge)
e.g: #set_serial_mode 1 2
...
...
(continued on next page)