Filter
Top Products
page | 49
Commands
Advanced Operation
#use_tcp_access
Enables or disables TCP access mode. This mode must be enabled before using RS-232
command to congure the IP to 2 x RS-232 Converter.
Syntax
#use_tcp_access param1
Parameters
param1 Value [0 ... 1]
Value Description
0
Disable TCP access
1
Enable TCP access
Example
#use_tcp_access 1
TCP Access is set to Enabled
Related Commands
#set_tcp_br_port
#set_tcp_term_port
#set_telnet_pass
#use_tcp_term_pass