Filter
Top Products
page | 28
Commands
Advanced Operation
Advanced Operation
#set_start_del
Sets the Start Delimiter mode and value for the specied serial port. The Start Delimiter
must always be specied before the End Delimiter.
Syntax
#set_start_del param1 param2 param3
Parameters
param1 Serial port [1 ... 2]
param2 State [0 ... 1]
Mode Description
1
TCP bridge
2
UDP bridge
3
Terminal mode
param3 Start delimiter [00 ... FF]
Example
#set_start_del 1 1 a0
Start delimiter set to ON with a value of a0
Related Commands
#set_add_delim
#set_end_del