Filter
Top Products
page | 70
Default Settings
Appendix
Appendix
The following table lists the default setting of the IP to 2 x RS-232 Converter, as displayed
under the built-in Web interface.
RS-232
RS-232 Settings
Select RS-232 Port • 1
Description • None
RS-232 Mode • TCP Bridge
Baud Rate • 19200
Data Bits • 8
Parity • None
Stop Bits • 1
Bridging Settings
Line Delay (ms) • 0
Force Send (ms) • 30
Force Send (bytes) • 100
Add Delimiters to data sent • Disabled
Use Start Delimiter • Disabled
Start Delimiter Value • 0
Use End Delimiter • Disabled
End Delimiter Value • 0
TCP Port • 49200
UDP Local Port • 50200
UDP Echo
Destination IP • 192.168.1.180
Destination Port • 50000
UDP Echo • Disabled