Filter
Top Products
Pressure Relief Procedure
PressurePressure
Pressure
ReliefRelief
Relief
ProcedureProcedure
Procedure
Follow the Pressure Relief Procedure
whenever you see this symbol.
This equipment stays pressurized until pressure
is manually relieved. To help prevent serious
injury from pressurized uid, such as skin injection,
splashing uid and moving parts, follow the
Pressure Relief Procedure when you stop spraying
and before cleaning, checking, or servicing
equipment.
TheFusionAPgunisshown.
1. Press to stop the pumps.
2. Turn off all heat zones.
3. Relieve pressure in gun and perform gun
shutdown procedure. See gun manual.
4. Close gun uid inlet valves A and B.
5. Shut off feed pumps and agitator, if used.
6. Route uid to waste containers or supply tanks.
Turn PRESSURE RELIEF/SPRAY valves (SA,
SB) to PRESSURE RELIEF/CIRCULATION
. Ensure gauges drop to 0.
SA
SB
GA
GB
7. Engage gun piston safety lock.
8. Disconnect gun air line and remove gun uid
manifold.
334945B55