Filter
Top Products
Remove Battery
To remove the battery, complete the following steps:
1. Place the MX3Plus in Suspend mode.
2. Detach the bottom hook of the handstrap (if installed).
3. Slide the battery retaining clip down to release the main battery.
4. Pull the battery straight up and out of the battery well.
Place the discharged battery pack in a powered battery charger.
Hotswap the Main Battery
Place the MX3Plus in Suspend Mode. Honeywell recommends any work in progress be saved prior to replacing the battery
pack.
Simply replace the discharged battery with a fully-charged battery. An MX3Plus, with a fully charged internal battery, will retain
data during a battery hotswap for 5 minutes.
2-3