Filter
Top Products
Startup Help
Contact Technical Assistance if you need more help.
Can’t change the date/time or
adjust the volume.
AppLock is installed and may be running in User Mode on the MX3Plus. AppLock user
mode restricts access to the control panels.
Touch screen is not accepting
stylus taps or needs recal-
ibration.
See Also: "Calibrating the Touch Screen"when the touch screen needs recalibration,
orPress Ctrl+Esc to force the Start Menu to appear. Use the tab, backtab and arrow keys
to move the cursor from element to element.
MX3Plus seems to lockup as
soon as it is rebooted.
There may be slight delays while the wireless client connects to the network, authorization
for voice-enabled applications complete, Wavelink Avalanche management of the
MX3Plus startup completes,and Bluetooth relationships establish or re-establish.
When the desktop appears or an application begins, the MX3Plus is ready for use.
New MX3Plus main batteries
don't last more than a few hours.
New batteries must be fully charged prior to first use. Li-Ion batteries (like all batteries) grad-
ually lose their capacity over time (in a linear fashion) and never just stop working. This is
important to remember – the MX3Plus is always ‘on’ even when in the Suspend state and
draws battery power at all times.
Continuous Scan Mode
If Continuous Scan Mode has been enabled (factory default setting is 'Disabled'), the laser (or imager) is always on and
decoding.
Caution: Laser beam is emitted continuously. Do not stare into the laser beam.
2-20