Filter
Top Products
Attaching the Handstrap
Note: The handstrap is pre-installed.
1. Place the MX3Plus with the screen facing down, on a flat stable surface.
2. Attach the handstrap retainer bracket to the MX3Plus with the screws and washers provided.
3. Fold each end of the strap over so that the closed loop fastener surfaces mate evenly.
4. Test the strap's connection making sure the MX3Plus is securely connected to each end of the handstrap's connectors.
Check the closed loop fastener, retainer bracket and clip connections frequently. If they have loosened, they must be tightened
or replaced before the MX3Plus is placed into service again.
2-16