Filter
Top Products
Backlights and Indicators
Across the top of the keypad are LEDs (Light Emitting Diodes) that provide visual cues to current MX3Plus operation. When
the LED is not illuminated, the function is inactive.
LED When illuminated . . .
2nd
The next keypress is a 2nd keypress. Amber when on. Blinks amber during configuration key
sequence.
ALT The next keypress is an ALT keypress. Amber when on and unlit when off.
CTRL The next keypress is a CTRL keypress. Amber when on and unlit when off.
SHFT
The next letter is the uppercase letter on alpha keys and the shifted character on the numeric keypad
keys. Amber when on and unlit when off.
CAPS
Uppercase letters are active until the CAPS key sequence is pressed again. Amber when on and
unlit when off.
STAT
Status Indicator. Amber when device is booting up. Blinking Green when display Suspend state
begins.
SCNR
Bar code scanner function, affected by both tethered scanners and the scanner endcap.
• Red - scanning.
• Green - good scan.
• Unlit - scanner is inactive.
BATT B
Backup Battery. When illuminated, the backup battery is charging. When unlit, the backup battery is
not charging.
BATT M
Main Battery. When illuminated, main battery capacity is low.
• Red – low battery.
• Blinking Red – power fail.
• Unlit - Main battery is not low OR all charge is depleted in both batteries.
CHGR
Charger. When on, the MX3Plus is receiving external power either from the DC power jack or the
MX3Plus is seated in a powered cradle.
• Red - Main battery is charging.
• Amber – Fault or temporary standby (Contact Technical Assistance).
• Green - battery charge is complete and the MX3Plus is connected to external power through the
power jack or a powered cradle.
2-5