Filter
Top Products
Connecting Bluetooth Devices
Before connecting to Bluetooth Devices:
l The system administrator has discovered, paired, connected and disconnected (using LXEZ Pairing Control Panel)
Bluetooth devices for each MX3Plus.
l The system administrator has enabled and disabled LXEZ Pairing parameters for the MX3Plus.
l The system administrator has also assigned a Computer Friendly Name using LXEZ Pairing Control Panel for the
MX3Plus.
To connect Bluetooth devices, the MX3Plus should be as close as possible and in direct line of sight (distances up to 32.8 feet
or 10 meters) with the targeted Bluetooth device during the discovery and pairing process.
If the devices are in Suspend, tap the power key to wake the MX3Plus.
Using the correct procedure, wake the targeted Bluetooth device if necessary.
There may be audible or visual signals as both devices discover and pair with each other.
Taskbar Connection Indicator
MX3Plus is connected to one or more of the targeted Bluetooth device(s).
MX3Plus is not connected to any Bluetooth device.
MX3Plus is ready to connect with any Bluetooth device.
MX3Plus is out of range of all paired Bluetooth device(s). Connection is inactive.
There may be audible or visual signals from paired devices as they move back into range and re-connect with the Bluetooth
hardware in the MX3Plus.
2-14