Filter
Top Products
Table of Contents
Chapter 1: Introduction 1-1
About This Guide 1-1
End User License Agreement (EULA) 1-1
Laser Warnings and Labels 1-2
Label Location 1-2
Label 1-2
Components 1-3
Front 1-3
Back 1-4
Endcap 1-4
Endcap Options 1-5
Chapter 2: Set Up A New MX3Plus 2-1
Hardware Setup 2-1
Software Setup 2-1
End User License Agreement (EULA) 2-1
Battery 2-2
Connect or Remove the Battery Pack 2-2
Insert/Replace Battery 2-2
Remove Battery 2-3
Hotswap the Main Battery 2-3
Charge or Recharge the Main Battery 2-4
Backlights and Indicators 2-5
Tapping the Touch Screen with a Stylus 2-6
Touch Screen 2-7
Calibrating the Touch Screen 2-7
Adjusting the Display Backlight Timer 2-7
Apply the Touch Screen Protective Film 2-7
Using the Input Panel / Virtual Keyboard 2-8
Set Date and Time Zone 2-9
Grab Time Utility 2-9
Autolaunch Time-Sync 2-9
Synchronize with a Local Time Server 2-9
Set Power Scheme Timers 2-10
Battery Power Scheme 2-10
AC Power Scheme 2-10
Adjust Speaker Volume 2-11
Using the Keypad 2-11
Using the Control Panel 2-11
i