Filter
Top Products
31
VIEW PRESET KEYS
The VIEW PRESET keys are used to program your three favorite
views for quick retrieval. Instead of using the VIEW key to cycle
through every view to find the one you want, you can program the VIEW PRESET
keys to display a specific view immediately. To program each VIEW PRESET key, use
the VIEW key to cycle to the view you want to store. Press and hold one of the VIEW
PRESET keys for several seconds. A series of audible chirps will be heard indicating
that the view has been programmed to the key. You can store up to three views,
one on each key.
EXIT KEY
The EXIT key has multiple functions, depending on the situation:
• If an alarm is sounding, pressing EXIT will cancel the alarm.
• If a menu tab is selected, pressing EXIT will exit the menu mode and return to the
view.
• If a menu is active, pressing EXIT will return to the previous level in the menu
system.
• Pressing EXIT will cycle through the available views in reverse order.
• If Freeze Frame is active, pressing EXIT will return to a scrolling display.
• If the Cursor is active, pressing EXIT will remove the cursor from the display.
INFO KEY
(937c DF Combo and 937c Combo models only)
Press the INFO key while in any navigation view to display information
about objects that are nearest to an active cursor.
If the cursor is not active, the following menu will be
displayed. Use the 4-WAY Cursor Control key to select
Nearest Port, Nearest Tide Station or Nearest Current
Station, then use the RIGHT Cursor key to display the
requested information.
NOTE: The built-in Uni-Map™ does not contain Port, Tide or
Current information. This information is only available from
optional purchase MMC/SD cards.
MARK/GOTO KEY
(937c DF Combo and 937c Combo models only)
Press the MARK key while in any view to mark the position of a
waypoint, either at the current boat location, or, if the Cursor is active,
at the current Cursor location.
If the Cursor is active, pressing the GOTO key while in any view creates
a waypoint and starts navigation towards that waypoint. If the Cursor
is not active, pressing the GOTO key displays the list of waypoints, so
that you can select the waypoint towards which you want to navigate.
ZOOM (+/-) KEY
(937c DF Combo and 937c Combo models only)
Press the - or + ZOOM keys while in any of the Navigation Views or the
Sonar Zoom View to change the scale of the view to appear closer or
farther away.
93x_Man_531370-1_A - vs4.qxd 2/18/2005 11:12 AM Page 36