Filter
Top Products
51
CHART SPEED
Chart Speed determines the speed at which the
sonar information moves across the display, and consequently the amount of detail
shown. A faster speed shows more information in the Sonar Views and is preferred by
most anglers; however, the sonar information moves across the display quickly. A
slower speed keeps the information on the display longer, but the bottom and fish
details become compressed and may be difficult to interpret. Regardless of the Chart
Speed setting, the RTS® Window will update at the maximum rate possible for the
depth conditions. Adjust Chart Speed to your personal preference.
T
o adjust the Chart Speed:
1. Highlight Chart Speed on the Sonar X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Chart
Speed setting. (1-9, Ultra, where 1 = Slow, 9 = Fast, Ultra = Fastest, Default = 4)
ZOOM LEVEL
(Sonar Zoom View, 931c DF and 931c models only)
Zoom Level sets the magnification level for the Sonar Zoom View, and is only available
on the Sonar X-Press™ Menu when the Sonar Zoom View is active on 931c DF and 931c
models. Use Zoom to increase the display resolution to separate sonar returns that are
very close together.
T
o adjust the Zoom Level:
1. Highlight Zoom Level on the Sonar X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Zoom Level
setting for the Sonar Zoom View. (2x, 4x, 6x, 8x, Default = 2x)
NOTE: The Zoom Preview Box tracks the bottom and cannot be moved by the user.
BOTTOM LOCK
(Sonar Zoom View only)
Bottom Lock changes the mode of the Zoomed view in the Sonar Zoom View.
T
o turn on Bottom Lock:
1. In the Sonar Zoom View, highlight Bottom Lock on the Sonar X-Press™Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Bottom Lock
setting to on. (Off, On, Default = Off).
3. Once you turn on Bottom Lock the Bottom Range X-Press menu choice will be
displayed. Bottom Range allows you to control the height above the bottom
that is shown in the Zoomed view. (10 - 60 feet, 2-10 fathoms, or 3-20 meters
[International Models Only])
SONAR COLORS
Sonar Colors allows you to select which color
palette you would like to use for the display.
T
o change the Sonar Colors:
1. Highlight Sonar Colors on the Sonar X-Press™menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the color palette.
(Standard, Gray, Inverse, Green, Default = Standard)
93x_Man_531370-1_A - vs4.qxd 2/18/2005 11:12 AM Page 56