Filter
Top Products
TRIPLOG RESET
(With Speed Input Only)
Triplog Reset resets the Triplog to zero. The Triplog provides the following information:
timer for elapsed time, distance traveled since last reset, and average speed.
T
o Reset Triplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor
key once more. To cancel Reset Triplog, press the LEFT Cursor key.
RESTORE DEFAULTS
Restore Defaults resets ALL menu settings to their
factory defaults. Use this menu choice with caution!
T
o Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor
key once more. To cancel Restore Defaults, press the LEFT Cursor key.
SELECT READOUTS
(Advanced)
Select Readouts allows you to customize the information
displayed in individual digital readouts on the left side of
many views, including suppressing a particular readout so
that nothing is displayed; the ability to customize readouts
depends on the view and whether you are navigating. This
Advanced feature allows you to select what data will be
displayed in each of 5 fixed-position data windows
arranged at the left edge of the Sonar View screen, or
whether a particular data window will be turned off,
displaying nothing in that area; you can access this menu
choice only when in Advanced User Mode (see Setup Menu
Tab: User Mode.)
Data windows can display readouts from supported accessories such as a Speed
accessory. Each data window can either be empty (Off) or contain one of the following:
• Heading • Temperature
• Depth • Time + Date
• Position • Triplog
• Voltage • Water Speed (only with a Speed accessory)
• Speed (if there is a GPS Receiver, then this refers to the speed detected by the GPS
Receiver; if no GPS Receiver, then this refers to the speed of the paddlewheel)
Sonar-only Views, Not Navigating: On Sonar-only views, as long as you are not
navigating, all 5 readouts are customizable.
Other Views, Not Navigating: On any view with a chart, as long as you are not
navigating, two of the readouts are not customizable: the 2nd box always displays
Heading, while the 5th box always displays Speed. On the Bird’s Eye View, when you
Select Readouts
72
93x_Man_531370-1_A - vs4.qxd 2/18/2005 11:12 AM Page 77