Filter
Top Products
CANCEL NAVIGATION
(Only when navigating)
Cancel Navigation discards the current route and exits Navigation Mode. This menu
choice will only appear when you are currently navigating a route. This will not delete
a previously-saved route.
T
o Cancel Navigation:
1. Highlight Cancel Navigation on the Navigation X-Press™ Menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.
3. The Confirm dialog box will appear. To cancel navigation, press the RIGHT Cursor
key once more. To avoid canceling navigation, press the LEFT Cursor key.
REMOVE TARGET
(Only if a Target is active)
Remove Target removes the waypoint target from the display. This menu choice will
only appear when a target has already been applied to a waypoint.
T
o Remove a Target:
1. Highlight Remove Target on the Navigation X-Press™ Menu.
2. Use the RIGHT 4-WAY Cursor Control key to remove the target.
REMOVE GRID
(Only if a Grid is active)
Remove Grid removes the waypoint grid from the display. This menu choice will only
appear when a grid has already been applied to a waypoint.
T
o Remove a Grid:
1. Highlight Remove Grid on the Navigation X-Press™ Menu.
2. Use the RIGHT 4-WAY Cursor Control key to remove the grid.
54
93x_Man_531370-1_A - vs4.qxd 2/18/2005 11:12 AM Page 59