Filter
Top Products
41
Display the Waypoints Submenu: From any view, press the MENU key twice to display
the Main Menu System, then use the RIGHT Cursor key to select the Navigation tab.
Select Waypoints and press the RIGHT Cursor key to display the Waypoints submenu.
Program a specific position as a waypoint: To create a waypoint that is NOT your
current position, from the Waypoints submenu, select the Create option and press the
RIGHT Cursor key. Use the Cursor keys to program a waypoint name, latitude,
longitude, and icon before selecting Save.
Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor
key to display a list of saved waypoints. Select the waypoint you want to edit and press
the RIGHT Cursor key. Use the 4-WAY Cursor Control key to move from field to field, and
the UP and DOWN Cursor keys to changes values once you are in a field. In the
Waypoint Name, Latitude and Longitude fields, use the UP and DOWN Cursor keys to
change the letter or number. All upper and lower case letters are available, as well as
digits 0-9 and some punctuation characters. In the Waypoint Icon field, use the UP and
DOWN Cursor keys to change the icon used to represent the waypoint on the Combo
and Chart Views. You can exit these fields with the LEFT and RIGHT Cursor keys or by
pressing the EXIT key. Select Save and press the RIGHT Cursor key to save your changes.
To make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor
keys to select a sort order:
• Name shows the waypoints alphabetically
• Time shows the most recently-created waypoint first
• Distance shows the closest waypoint first.
Delete a waypoint: From the Waypoints submenu, select Delete and press the RIGHT
Cursor key to display a list of waypoints. Select the waypoint you want to delete, then
press the RIGHT Cursor key. You will be asked to confirm deletion before the waypoint
is actually deleted.
NAVIGATE TO A WAYPOINT OR POSITION
(937c DF Combo and 937c Combo models only)
Navigate to the cursor position: From any Chart or Combo view, use the Cursor key to
select a position or waypoint to which you want to navigate. Press the GOTO key.
Navigation will begin immediately.
Navigate to a specified waypoint: Press the GOTO key, then choose the waypoint to
which you would like to navigate from the waypoint list and press the RIGHT Cursor
key to select it.
NOTE: By repeating the previous instructions, you can add more waypoints to create a
longer multi-segment route.
Skipping a waypoint: From the Navigation X-Press™ Menu, select Skip Next Waypoint
and press the RIGHT Cursor key. If there is not another waypoint to skip to, navigation
will be cancelled.
Cancel navigation: From the Navigation X-Press™ Menu, select Cancel Navigation and
press the RIGHT Cursor key. Canceling navigation removes the route and any
waypoints created using the GOTO key, but does not remove any saved routes from
memory. You will be prompted to save the current route when you cancel navigation.
93x_Man_531370-1_A - vs4.qxd 2/18/2005 11:12 AM Page 46