Filter
Top Products
73
are not navigating, there are four fixed info boxes that show Depth, Heading, Position
(Lat/Lon) and Speed. When you are navigating in the Bird's Eye View, there are two
columns of four boxes. The first column shows Depth, Time To Go (TTG), Position
(Lat/Lon), and Speed. The second column shows Cross Track Error (XTE), Heading,
Bearing, and Distance To Go (DTG).
All Views, Navigating: When you are navigating, all readouts in all views (even split
screen views with a Sonar display) cannot be customized, with the exception of the top
readout info box, which is still customizable. In any view, while you are navigating, the
second readout box shows Heading, the third box shows Bearing, the fourth box is
divided to show Cross Track Error (XTE) and Distance To Go (DTG), and the fifth box is
divided to show Time To Go (TTG) and Speed.
.
T
o Select Readouts:
1. Make sure you are in Advanced User Mode, then highlight Select Readouts on
the Setup main menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Readouts submenu will appear, showing a list of all Readouts. Use
the UP or DOWN Cursor keys to select a particular Readout position, then use
the RIGHT or LEFT Cursor keys to change what will be displayed at that position.
(Heading, Depth, Navigation, Position, Off, Speed, Temperature, Time+Date,
Triplog, Voltage, Water Speed)
Customized Sonar View
Default Sonar View
93x_Man_531370-1_A - vs4.qxd 2/18/2005 11:12 AM Page 78