Filter
Top Products
12
4.1 iCONNECT Software
The iServer may also be assigned an IP Address by using the iCONNECT software.
a) Download the iCONNECT software from the website listed in this manual.
b) Install iCONNECT software on a networked PC. This software is compatible with
Windows 95, NT, 2000, and XP.
c) Use iCONNECT to assign an IP address to the iServer and access its web pages
for configuration. You can also use any standard web browser to access the
iServer’s web pages. Consult with your IT department for obtaining an IP address.
Figure 4.2 Assigning an IP Address using iCONNECT
d) To access the iServer for Configuration:
Click on the “View Webpage” button, you will access the iServer’s home page, refer to
Section 4.3 for details.
Figure 4.3 Accessing the iServer’s Home Page Menu
Place the IP address in this box
Take the MAC address from the
label attached to the bottom of
the iServer and place it in this
box
Click here to send the above IP
address to the iServer
After the IP address is assigned
to the iServer, click here to
access it’s web pages