Filter
Top Products
4.3.5 Configuration (continued)
Figure 4.11 Configuration
Below are the definitions of terms used in the Configuration page.
A) Sensor/Device Setup
Clicking on the No. 1 or 2 allows you to modify the Sensor/Device Parameters (see
Section 4.3.6 for more details).
http://192.168.1.200
Click on Device No. on the left to modify Sensor Parameters.
Sensor Name
Temperature
Pressure
Remote Format
T0000.00
P00000.0
Remote End Char (HEX)
0D
0D
Offset
0000.0
0000.0
07/24/2006
Flash Card Pre-Recorded AC Power On
0070.0 nnnn.n0095.0 nnnn.n
Pressure/Temp F:hPa
Sensor Units:
07/25/2006
07/28/2006
05:00:00
19:00:00
Status/RTC/AlarmWrap
5Command
21