Filter
Top Products
4.3.1 Read Sensor
• Click on . In a few seconds the following page (Figure 4.7) will appear
with all default values of 100.00. Then the actual readings of Temperature and
Barometric Pressure will be displayed.
• This page automatically updates the Temperature and Barometric Pressure values.
• Click on Main Menu to return to Home Page.
While accessing the Read Sensor page, If a blank screen appears without any
“java application running” or image of a “Java logo”, please verify you have the
latest Java Runtime Environment installed and configured according to the
following instructions. If you do not have Java Runtime Environment, you may
download it from our website or contact the Customer Service Department
nearest you.
Figure 4.7 Read Sensor
4.3.1.1 Java Runtime Environment 1.4 Setup instructions
1. Go to your computer's Control Panel. Open the Java Plug-in
2. Select the "Cache" Tab
Un-check the "Enable Caching" box
3. Select the "Proxy" Tab. Follow these Browser Proxy Selection instructions
below. (Generally, un-check the box if accessing iServers on your local
network and check the box for access from your internal network to the
internet.)
4. Refresh or restart the webpage.
http://192.168.1.200
Pressure/Temp
Pressure
Temperature
hPa
F
1000.40
79.80
o
Pressure/Temp
Read Sensor
15