Filter
Top Products
5-2
Setting parameter items
The following print parameters can be set.
Setting PDL parameters and device parameters can be set.
• PARAMETER MODE (DSCAN only)
• MEDIA SERIES (8HP-GL, TIFF, CALS only)
• AUTO SUPPLY
• FIXSIZE MODE
• COPY COUNT
• SUPPLY PARAM.
• DRAWING PARAM.
• SCALING PARAM.
• FORMAT PARAM.(HP-GL, DSCAN only)
• PEN PARAMETER (HP-GL, DSCAN only)
• RASTER PARAM.
Though the setup menu can be referred to or changed during the printing
process, the changed parameters are effective from the next job.
The changed parameters are automatically saved after the completion of
the setup operation, but the parameters that were only referred to are not
saved.
Setting parameters in the setup menu are tabulated below and each
parameter is explained. Most of setting parameters as well as those of
PDL are common. Parameters which are not displayed by PDL or those
of different display are defined each time.
e.g. DSCAN only, etc.
SET UP
#PORT1_HPGL