Seiko Instruments LP-1020 Marine GPS System User Manual


 
1-12
Right side/rear side
1 Main power switch Turns the device power on and off. ( page 2-3)
2 Power cord Plug this cord into a power cord socket.
3 Parallel interface connector
This is an interface connector conforming to the standards of the
Parallel interface connector of Centronix.
4 Ethernet interface connector
This is an interface connector for a 100 BASE-TX and 10 BASE-T
Ethernet interface connector.
5
USB interface connector
This is an interface connector for a USB 2.0 interface connector.
6 Cutter door (door 5) Open this door to deal with paper jams at the cutter area.
( page 14-3)
7 Cutter door inside (door 9)
Open this door to deal with paper jams at the cutter area.
( page 14-3)
8 Cutter door lower small door (door 10)
Open this door to deal with paper jams at the cutter area.