Filter
Top Products
6-3
▼Setting items
Chapter 6 "DEVICE" menu
POWER SAVE
Specifies the time until the power saving mode is entered to minimize the
power consumption.
<Parameter (choice input method)> : Default value
15 min Device enters the power saving mode after being left for 15
minutes.
30 min Device enters the power saving mode after being left for 30
minutes.
60 min Device enters the power saving mode after being left for 60
minutes.
90 min Device enters the power saving mode after being left for 90
minutes.
235 min Device enters the power saving mode after being left for 235
minutes.
• After completion of plotting, when the preset time for waiting data
has elapsed, the device automatically enters the power saving mode.
• When data is received, the power saving mode is automatically reset.
• By pressing the key, the power saving mode is automatically
reset.