Filter
Top Products
Appendix-21
▼ Command list
Command list
HP-GL,HP-GL/2 Device Control Command List
Symbols in the following table denote as follows:
™
: Denotes the command supported by this plotter.
z
: Denotes that only part of the command function is supported by this plotter.
× : Denotes the command not supported by this plotter.
If a command not supported by this plotter is received, that command is ignored.
If a command not listed in the following table is received, the command error occurs.
(
1
) Because serial communication is not supported.
(
2
) Only the binary raster data is effective. Vector data and multi-value raster data are effective only
in the color overlap mode.
(
3
) The fonts of font number specified by the AD or SD command are plotted with the fonts of the font
number specified by the CS command shown in the following table.
(
4
) Recognized as EOF.
dnammoCnoitcnuFtroppuS
(.CSE
Y.CSE
noitcurtsniNOrettolP
).CSE
Z.CSE
noitcurtsniFFOrettolP
@.CSEnoitcurtsnitesnoitarugifnocrettolP
× (
1
)
A.CSEnoitcurtsnituptuorebmunledomrettolP
× (
1
)
B.CSEnoitcurtsnituptuoecapsreffuB
× (
1
)
E.CSEnoitcurtsnituptuorebmunrorredecnavdA
× (
1
)
H.CSEnoitcurtsnites1edomekahsdnaH
× (
1
)
I.CSEnoitcurtsnites2edomekahsdnaH
× (
1
)
J.CSEnoitcurtsnitrobanoitcurtsnilortnoceciveD
× (
1
)
K.CSEnoitcurtsnitrobagnittolP
× (
1
)
L.CSEnoitcurtsnituptuoezisreffubO/IlacigoL
× (
1
)
M.CSEnoitcurtsnitestuptuO
× (
1
)
N.CSE
tesdecnavdaedomekahsdnah,edomtuptuO
noitcurtsni
× (
1
)
O.CSEnoitcurtsnituptuosutatsdecnavdA
× (
1
)
P.CSEnoitcurtsnitesdradnatsedomekahsdnaH
× (
1
)
Q.CSEnoitcurtsnitesedomrotinoM
× (
1
)
R.CSEnoitcurtsniteseR
× (
1
)
S.CSEnoitcurtsnituptuoezisreffuB
× (
1
)
TCSEnoitcurtsnitesezisreffuB
× (
1
)
U.CSEreffubhsalffodnE
× (
1
)